Engine bay with timing cover removed on a driveway, mobile mechanic Kent cambelt change

Mobile Timing Belt Replacement in East Kent, on Your Driveway

October 24, 2026

Written by Petro Olekhnovych, mobile mechanic in Aylesham, Kent

Quick answerYes, we replace timing belts at your home or workplace across East Kent, from Aylesham and Canterbury to Dover, Deal, Sandwich and Folkestone. A typical job replaces the belt, tensioner and idlers, and usually the water pump and coolant if the pump is belt driven. Send your reg and we will confirm the parts, the time it takes and a quote before we book.

Why a mobile cambelt change makes sense

A timing belt change is one of the biggest routine jobs on a car, and the car has to be off the road while it is done. Taking it to a garage usually means arranging lifts, leaving it for the day and collecting it later. With a mobile mechanic, the work happens on your driveway or at your workplace while you carry on with your day.

It also suits cars that are close to or past their belt interval, where you would rather not risk a drive to a garage. If a belt is badly overdue, the less you drive it the better.

What is included in a timing belt replacement

Exactly what is needed depends on the engine, but a proper job usually includes:

  • Timing belt: the toothed belt that keeps the crankshaft and camshafts in time.
  • Tensioner and idler pulleys: the bearings in these wear at the same rate as the belt, and a seized pulley can destroy a new belt.
  • Water pump: on many engines the belt drives the pump, so it is replaced at the same time. See water pump failure symptoms for why.
  • Coolant: drained and refilled with the correct type when the pump is changed.
  • Auxiliary belt: often removed for access, and worth renewing if it is worn.

We use the correct engine locking tools so the timing is set exactly, then turn the engine over by hand to confirm everything lines up before it is started.

Engine problem or belt due?

Timing belts, water pumps, coolant and fault finding done at your door.

WhatsApp for a free quote Call 07563 350335 Contact form

Labour £30 to £50 per hour depending on the job. Send your reg number and we will reply with a price before any work starts.

How the job works on your driveway

  1. Quote from your reg: you send the reg and postcode on WhatsApp. We check the engine, the parts kit and the labour time.
  2. Booking: we agree a day. We need a flat, safe space to work, ideally a driveway or private parking space. Some public streets are fine, but let us know what parking is like.
  3. On the day: the car is supported properly on axle stands where needed, never on a jack alone. Covers, mounts and ancillaries come off, the old parts are removed and the new kit is fitted.
  4. Checks: coolant is bled, the engine is run up to temperature, and we check for leaks and correct running.
  5. Records: we note the mileage and date so you can add it to your service history.

Time varies a lot between engines. Some are straightforward, while others need engine mounts supporting and removing, which takes most of a day.

When your belt is due

Manufacturers give an interval in miles and years, whichever comes first. A car doing low mileage around the villages can reach the time limit long before the mileage, and rubber ages regardless. Our guide to when to replace a timing belt explains how to find your interval. If you are not sure whether your car has a belt or a chain, send the reg and we will tell you.

Some newer engines use a wet belt that runs in oil. These have their own issues and service needs, covered in our article on wet timing belts. Ask us whether yours is a job we can do at home.

What affects the cost

We do not publish fixed prices because they vary so much between cars. The main factors are:

  • how long the engine takes, based on access and whether mounts must come off
  • whether the water pump is belt driven
  • the price of the parts kit for your engine

Our labour rate is £30 to £50 per hour depending on the job. For more on what drives the price, read timing belt and water pump replacement cost.

How we can help

We replace timing belts, tensioners and water pumps at your home or work across Aylesham, Canterbury, Dover, Deal, Sandwich, Folkestone, Wingham, Bridge, Barham, Shepherdswell, Adisham and nearby villages. You get a clear quote before any work starts. Message your reg and postcode on WhatsApp 07563 350335 or use our contact page. If you want to know what is at stake with an overdue belt, see what happens if a timing belt snaps.

Engine problem or belt due?

Message us on WhatsApp with your reg and postcode, or use our contact form, for a price before any work starts.

WhatsApp for a free quote Call 07563 350335 Contact form

Labour £30 to £50 per hour depending on the job. Send your reg number and we will reply with a price before any work starts.

Frequently asked questions

Can a timing belt really be changed on a driveway?

On most cars with a conventional dry timing belt, yes. It needs the right tools, the correct locking kit for the engine and enough space to work safely, which most driveways and private parking spaces provide.

How long does a mobile cambelt change take?

It depends on the engine. Some are a few hours, others take most of a day because of engine mounts and covers that must come off. We tell you the expected time when we quote from your reg.

Should the water pump be changed at the same time?

If the water pump is driven by the timing belt, it is usually sensible to replace it with the belt. Much of the labour is shared, and a pump that fails later can damage the new belt.

Do you cover my area?

We cover Aylesham, Canterbury, Dover, Deal, Sandwich, Folkestone, Wingham, Bridge, Barham, Shepherdswell, Adisham and nearby villages. Send your postcode on WhatsApp if you are not sure.

Back to Blog